IUE RDAF Library

The following is a listing of the entire contents of this library for IDL. Click on an individual procedure name to view its header and source code. This listing is a shortened form of the much longer entire library help file. This may be handy for text searchs, be beware that some of these are huge and may take a long time to load or even crash your browser.

[Go Back to Main Search Page]

Last modified: Thu Dec 21 21:32:40 2000.

List of Routines

ADDCOM ADDCOM 8/6/93 File Conversion *CATEGORY: Adds information stored in input text file to the input FITS header. *CALLING SEQUENCE: ADDCOM,HEADER,FNAME,KEYW,newhd
ADDICOM ADDICOM 8/6/93 File Conversion *CATEGORY: Adds information specified interactively by the user to the input FITS header. *CALLING SEQUENCE:
ADDPAR Add or modify a parameter in a FITS header array. *CALLING SEQUENCE: ADDPAR, HEADER, NAME, VALUE, comment, location, format=format, before = before, after = after *PARAMETERS: HEADER (REQ) (IO) (1) (S)
ARTIFACT ARTIFACT 1989 August 7 File Retrieval *CATEGORY: To retrieve fits files which display low dispersion IUE camera artifacts. *CALLING SEQUENCE:
ASC_READ ASC_READ Reads an ASCII file containing a table of numbers (up to 15 columns) and outputs the values as floating point vectors. *CALLING SEQUENCE: ASC_READ,FILENAME,P1,p2,p3,p4...,p15,sl=f,ll=l,nel=n *PARAMETERS:
ASC_WRITE ASC_WRITE Creates an ASCII table file in which each column represents one of the specified input vectors. Up to 15 parameters are allowed. *CALLING SEQUENCE: ASC_WRITE,FILENAME,P1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15 *PARAMETERS:
ASSESS ASSESS (RDAF General Production Library) (18-DEC-83) History *CATEGORY: List IUESIPS software changes to the terminal which may affect the input image file *CALLING SEQUENCE:
ATRD To convert FITS ASCII table entries to correct data types *CALLING SEQUENCE: ATRD,BYTE_EQ,TYPE,VARIABLE *PARAMETERS: BYTE_EQ (REQ) (I) (1) (B) The byte equivalent vector of the data variable to be converted.
BARKER Spectral Data Reduction *CATEGORY: To derive the ripple parameters K and alpha for orders m1 to m2 for IUE high dispersion data. The algorithm used is based on the Barker ripple correction algorithm A.J. 89, 899 (1984), which relies upon minimizing the
BARKER3 Spectral Data Reduction *CATEGORY: Procedure to extract 3 spectral orders and plot result. *CALLING SEQUENCE: BARKER3,IMAGET,M0,H,WAVE,FLUX,EPS,K1 *PARAMETERS:
BASEREM BASEREM 30 SEPTEMBER 1980 *CATEGORY: To fit a polynomial of order NDEG to a user-specified spectral region for removing a baseline from a spectral feature. *CALLING SEQUENCE: BASEREM,X,Y,NDEG,XL,XR,A,YBF,CHIS
BBCMP BBCMP 30-MAR-83 *CATEGORY: To compute the rms and average deviations of an observed spectrum from Planck curves calculated at user-specified temperatures. *CALLING SEQUENCE: BBCMP,WAVE,FLUX,TEMP,AVGD,RMS
BBDRAW BBDRAW 6-JAN-83 *CATEGORY: Draw blackbody curves over data through a given point. *CALLING SEQUENCE: BBDRAW,WAVE,FLUX,WPICK,TEMP,DILUTION,WBB,FBB,q=q,sigma=sigma *PARAMETERS:
BCOMP BCOMP (RDAF General Production Library) 5 September, 1986 Resampling *PURPOSE: To resample high dispersion IUE data onto a uniformly spaced wavelength grid. Data is averaged in each wavelength bin. *CALLING SEQUENCE:
BFIT bfit *CALLING SEQUENCE: BFIT,W,F,Q,B,lines=lines,nfirst=nfirst To create a background vector from the SILO image using the same method as SWET (the extraction step of NEWSIPS). *PARAMETERS:
BGEX BGEX (RDAF Production Library) DEC. 12, 1986 Spectral Extraction *CATEGORY: *PURPOSE: Procedure to run GEX1 and GEX2 procedures without user interaction. Parameters are input implicitly via the disk file GEX.TXT created
BIMAGE BIMAGE (General IDL Library 01) 12 DECEMBER, 1986 Resampling *CATEGORY: *PURPOSE: To bin a vector or a two dimensional array in either or both directions. *CALLING SEQUENCE:
BINLAB BINLAB *CATEGORY: NEWSIPS Converts lines of the binary portion of the IUESIPS Vicar label that are stored in hexadecimal notation in the NEWSIPS fits header back into binary.
BINS BINS (General IDL Library 01) 6-JAN-83 Resampling *PURPOSE: To bin flux data on a specified wavelength grid with or without weights. *CALLING SEQUENCE: BINS,WAVE,FLUX,WEIGHT,WCENTER,WIDTHS,WMEAN,WSIGMA,WGT,$
BITLIS BITLIS AUG. 28, 1989 data display *CATEGORY: *PURPOSE: To display bit pattern for byte, integer or longword integer scalars or vectors.
BITTEST BITTEST (General IDL Library 01) 30-MAR-83 Utilities *CATEGORY: TO TEST BIT N IN FIX(X) *CALLING SEQUENCE: BITTEST,X,N,YESNO
BLEMISH BLEMISH (General IDL Library 01) August 13, 1986 Data Editing *CATEGORY: *PURPOSE: To interactively remove blemishes in a flux vector by linear interpolation between the flux values on each side of the
BOXCAR boxcar *CATEGORY: NEWSIPS, IUESIPS *CALLING SEQUENCE: BOXCAR,IMAGET,object,bckgd,h,w,g,b,n,f,q,/extended,/small,$ medianw=medianw,meanw=meanw,expt=expt,/melo,/fits,/chebyshev
BSPOT BSPOT (RDAF General Production Library) Jan 30, l983 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: To interactively flag or linearly interpolate over bright spots or
BS_FLAG BS_FLAG (RDAF General Production Library) JUNE 18, 1985 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: Sets IUESIPS epsilon flags or NEWSIPS nu flags and/or interpolates over
BS_INOUT BS_INOUT (RDAF General Production Library) Jan 30, 1983 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: Create an output IUESIPS LBLS or NEWSIPS-like SILO disk file based on
BS_PLOTFLAG BS_PLOTFLAG (RDAF General Production Library) Jan 30, l983 Data Editing *CATEGORY: IUESIPS NEWSIPS Overplot IUESIPS or NEWSIPS flagged data, overplot flagged interpolated data, and overplot user flagged data when called indirectly by BSPOT
BS_UPDATE BS_UPDATE (RDAF Production Library) June 18, l985 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: For IUESIPS, updates IMAGET output file with corrected data for line
CALIB CALIB (RDAF General Production Library) JUNE 8, 1981 Spectral Calibration *CATEGORY: *PURPOSE: To apply an absolute calibration to IUE low and high dispersion spectral data and the LWR sensitivity degradation correction
CAMTRACE CAMTRACE (RDAF General Production Library) January 28, 1987 *CATEGORY: Set up default tracings for large or small aperture spectra when called by MISDAT. *CALLING SEQUENCE: CAMTRACE,NC,APNAME
CHISQ CHISQ (General IDL Library 01) JUNE,1984 Statistics *PURPOSE: To evaluate reduced chi-squared for a fit to data. *CALLING SEQUENCE: CHISQ,Y,WEIGHT,YFIT,NFREE,CHISQ
CHKFITS *CATEGORY: Reads the first 80 bytes of a file. Based on the values of the first six and 30th bytes, CHKFITS determines if the file is a FITS file. *CALLING SEQUENCE: CHKFITS,FILENAME,RESULT,silent=silent *PARAMETERS:
COADD COADD (RDAF General Production Library) July, 1986 correction *CATEGORY: IUESIPS NEWSIPS *PURPOSE: To coadd IUESIPS RDAF .SAV formatted files OR NEWSIPS fits formatted
CODEMX *CATEGORY: To determine if the variable is scalar, a vector of numpts points, or *CALLING SEQUENCE: CODEMX,VARIABLE,NAME,NUMPTS,ERR *PARAMETERS: VARIABLE (REQ) (I) (0 1) (I L R D)
COMBALL COMBALL (RDAF General Production Library) Sep, l986 Resampling *CATEGORY: *PURPOSE: Combines high disp orders into a single vector < 10000 points long. *CALLING SEQUENCE:
COM_ABCAL COM_ABCAL Spectral Calibration *CATEGORY: Procedure to apply IUE absolute calibration to high dispersion spectra being processed by BCOMP. *CALLING SEQUENCE:
COM_HIA Spectral Data Reduction *CATEGORY: Procedure to get next order for COMBALL (from QIUEHI3 & IUEHI) *CALLING SEQUENCE: COM_HIA,UNIT,K0,A,ER,CAM,M0,OFL,W1,W2,NET1,NET2,E1,E2,NP1,NP2,H,W,F,E *PARAMETERS:
COM_SPL Spectral Data Reduction *CATEGORY: Creates a new wavlength vector composed of those wavelengths of wave1 less than or equal to wavel, and those of wave2 greater than or equal to wavel. Creates a new flux vector by splicing flux1 and flux2 at the same indices at which wave1 and wave2 were joined.
CONFIND CONFIND (General IDL Library 01) User i/o; curve fitting *CATEGORY: Procedure to select continuum points in a spectrum. CONFIND is a modified version of the front end of NORM which uses the interactive graphics cursor to pick out points for later continuum fitting.
CONMENU CONMENU *CATEGORY: If no translation mode is requested, inform the user of the available options and request a translation mode. Determine if the requested translation mode is a valid request. *CALLING SEQUENCE:
CONVERT CONVERT *CATEGORY: IUESIPS *PURPOSE: To convert IUE .dat and .lab files to a format compatible with the host operating system. CONVERT supports IUE RDAF-format
CON_DB Converts database files to a format compatible with the host operating system. CON_DB can convert files created with IDBCREATE to the appropriate format for the host operating system. *CALLING SEQUENCE: CON_DB,NAME,cpupar *PARAMETERS:
CON_RDAF CON_RDAF *CATEGORY: IUESIPS To convert IUE RDAF-format .dat and .lab files between SunOs ULTRIX, DOS, and VMS formats, using FINDFILE and CONVERT. *CALLING SEQUENCE:
CON_SAV *CATEGORY: Converts RDAF *.sav files to a format compatible with the host operating system. CON_SAV can convert files created with IUESAVE under VMS IDL version 1 or version 2, and files created under DEC or SunOS IDL version 2 to the appropriate format for the host operating system. Output files are written using IDL FORTRAN
COPUF COPUF Disk File Utility *CATEGORY: IUESIPS NEWSIPS Copies unformatted or formatted data from the input file to the specified output file using IDL read and write commands (i.e.,
CPYCHK cpychk To check for existence of a file to be written. *CALLING SEQUENCE: cpychk,file,cpy,/update,/qsupersede *PARAMETERS: file (req) (i/o) (0,1) (s)
CRSCOR CRSCOR JUNE,1984 Cross-correlation *CATEGORY: *PURPOSE: To derive the normalized cross correlation function for two spectra (using either linear wavelengths or velocity units), and
CRSMAX CRSMAX (IUE Production Library) (01 April 1988) cross-correlation *CATEGORY: DETERMINE THE MAXIMUM OF THE CROSS CORRELATION FUNCTION *CALLING SEQUENCE: CRSMAX,CROSS,VSPACE,INP,DELV,SIGY
CRSPROD CRSPROD (IUE Production Library) (01 April 1988) cross-correlation *CATEGORY: To compute a normalized cross correlation for two spectral segments which are sampled on the same linear or log(lambda) scale. *CALLING SEQUENCE:
CRSTRIM CRSTRIM (IUE Production Library) (01 April 1988) cross-correlation, spectral extraction, resampling *CATEGORY: To extract the spectral data within the user-specified wavelength range, and to interpolate the spectral data to a common log(lambda) scale.
CURESTR *CATEGORY: Determine if the image's camera and dispersion are permitted. This is useful as different cameras and dispersions will be released at different times. Once all data has been release, this procedure will no longer be necessary. *CALLING SEQUENCE:
DATAREC File Transfer *CATEGORY: Procedure to convert IUESIPS GO-format tape or disk files to RDAF-format disk files - deals with data records. *CALLING SEQUENCE: DATAREC,UNIT,IMAGET,NCAM,NIMAGE,NL,NB,LUNI,ITFN,NBLOCKS
DATECONV Procedure to perform conversion of dates between any of 5 possible
DCCOR DCCOR Data correction, reprocessing, and calibration. *CATEGORY: Corrects wavelengths for low or high dispersion LWR and SWP images taken after 1984 which were processed with dispersion constants originally implemented in IUESIPS in either 1984 or 1988.
DECIPHMX *CATEGORY: Decipher IUE merged extracted spectrum image fits files and return the aperture. The wavelengths, calibrated flux, NEWSIPS flags, sigmas, background flux, and net flux might be returned. *CALLING SEQUENCE: DECIPHMX,FILENAME,ROW,APERTURE,wave,abs_flux,flags,sigma,bkgrd,net
DECOMPOSE DECOMPOSE (General IDL Library 01) 19-JUL-81 *CATEGORY: Break file name into component parts, using VMS and RSX11 punctuation *CALLING SEQUENCE: DECOMPOSE,FILE,DISK,PATH,NAME,EXTN,VERSION *PARAMETERS:
DELCRCC DELCRCC Jul. 22, 1994 VMS File utility *CATEGORY: To create a new version of the specified input file with the "carriage return carriage control" record attribute changed to "none" (for vms disk files only).
DELPAR Procedure to delete a keyword parameter(s) from a FITS header *CALLING SEQUENCE: DELPAR,H,PARNAME *PARAMETERS: H (REQ) (IO) (1) (S) - Fits header
DETERM DETERM (General IDL Library 01) July 25 1984 Matrix Arithmetic *CATEGORY: *PURPOSE: TO CALCULATE THE DETERMINANT OF A SQUARE MATRIX *CALLING SEQUENCE:
DFCORR DFCORR 3-21-90 IUE Absolute Calibration Correction *CATEGORY: To apply David Finley's absolute calibration correction to IUE data *CALLING SEQUENCE: DFCORR,W,F,FCORR
DIRLIST DIRLIST File Display *CATEGORY: To create directory listings without spawning to system commands (i.e., to partially emulate vms DIR or unix ls commands). *CALLING SEQUENCE:
DISPCON DISPCON 6-MAY-81 PROGRAMMER: T.B. AKE *CATEGORY: Extracts dispersion constants from an IUE extracted spectral file header label. *CALLING SEQUENCE: DISPCON,IMAGET,B,A
DOSPLAT DOSPLAT system dependancies - DOS *CATEGORY: Set system dependant items such as system commands that will be spawned, internal data formats, etc. DOS/WINDOWS types - { windows 3.1 3.6.1b }
DTRANS DTRANS *PURPOSE: To convert homogeneous data files to a format compatible with the current operating system. DTRANS supports data file conversions between SPARC (Sun-4s and SPARCStations), MIPSEL (DECstation 3100 and IBM 386-class PCs) and VAX (VAXstation 3100 and MicroVAX).
EBCDIC EBCDIC (General IDL Library 01) June 26, 1980 format conversion, i/o *CATEGORY: *PURPOSE: Converts a 1-D byte array of EBCDIC code to a 1-D byte array of ASCII *CALLING SEQUENCE:
ERRBAR To plot error bars at specified data coordinates. Single or multiple error bars may be plotted at the same
EXMELO EXMELO (RDAF General Production Library ) DECEMBER 15, 1981 Spectral Extraction *CATEGORY: *PURPOSE: Procedure to extract flux data from a line-by-line spatially resolved IUE image file.
EXPLIB EXPLIB July 22, 1994 *CATEGORY: To add !iuer.expr (the IUEDAC experimental library) to the beginning of the IDL search path, or remove it, or tell user if it's present. *CALLING SEQUENCE: *PARAMETERS:
EXPOFIN EXPOFIN *CALLING SEQUENCE: EXPOFIN,LABEL,MIDT,EXP,rr This procedure will extract the midtime and duration of an exposure from the science image header. *PARAMETERS:
EXTFITS EXTFITS 8/30/90 File Conversion *CATEGORY: Converts IUESIPS extracted files (i.e., MEHI & MELO files) to FITS files. MODE = 1 (default) creates a binary table file containing order number (M), number of good data points (NPT), wavelength vector
FDATE FDATE converts day-of-year to Gregorian date in a format required by FITS conventions (i.e. dd/mm/yy). Works on cumulative day from 1-JAN-1979 (for instance), as well as more well-mannered days-of-year. *CALLING SEQUENCE: FDATE,YEAR,DAY,D_STRING
FDMX *CATEGORY: Decipher IUE merged extracted spectrum fits files and return data. *CALLING SEQUENCE: FDMX,FILENAME,ROW,SREC,EXTHD,APERTURE,wave,abs_flux,flags,sigma, $ bkgrd,net *PARAMETERS:
FEATURE FEATURE (General IDL Library 01) 9 JANUARY 1981 spectral lines, measurement *CATEGORY: *PURPOSE: To measure the essential attributes of a spectral feature *CALLING SEQUENCE:
FEATURE_OUT FEATURE_OUT AUG. 28, 1989 formatted text output for feature.pro *CATEGORY: *PURPOSE: To output the results of the feature procedure measurements to text and graphics windows
FESCALC FESCALC.PRO (IUE Production Library) FES magnitude procedure *CATEGORY: To calculate a target's V magnitude, based on its color index and FES counts, using the Fireman and Imhoff (1989) calibration for the former FES reference point (-16,-208). To calculate a target's V magnitude,
FILECOPY FILECOPY (General IDL Library 01) 22-FEB-81 *CATEGORY: *PURPOSE: On VMS system: to copy one file from an input tape to an output tape *CALLING SEQUENCE: FILECOPY,IN,BUFSIZE,NTRIES,OUT
FILETYPE *CATEGORY: IUE specific error checking and file name parsing Procedure to verify that a file is on disk, and to parse the file name. *CALLING SEQUENCE: FILETYPE,IMAGET,DISK,PATH,NAME,EXT,VERS,NCAM,TYPE,ISN
FILTER FILTER (General IDL Library 01) MAY 31,1981 Smoothing *CATEGORY: *PURPOSE: PERFORM AN ARBITRARY SYMMETRICAL FILTERING. *CALLING SEQUENCE:
FINDELT FINDELT This program will search the file ELEMENTS.LIS for the set of orbital elements appropriate for the given observation date. If the image is too recent to have an appropriate set of elements in the list, or if there is an error opening the list file, the procedure ORBEL is called to extract the elements from the science image header, if an image was
FITSCON FITSCON To convert FITS binary table data types (i.e. IEEE format) to format used on current cpu. *CALLING SEQUENCE: FITSCON,BYTE_EQ,TYPE,VARIABLE,TDIM=S *PARAMETERS:
FITSLAB Data Conversion *CATEGORY: To convert the IUE label file to a set of FITS keywords. Binary data is converted to hexadecimal notation. Each line of the main header (including appendage) is written with a blank keyword. The HISTORY keyword is added to each line of the image processing
FLAGBLEM FLAGBLEM (RDAF General Production Library) JAN 30, l983 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: Plots expanded region around blemishes and prompts user for input
FLAGNAN FLAGNAN *CATEGORY: To flag and/or replace IEEE NaN values in an IDL array. *CALLING SEQUENCE: FLAGNAN,ARRAY,IND,COUNT,nvalue *PARAMETERS:
FMEAS FMEAS (General IDL Library 01) spectral lines, measurement *CATEGORY: To numerically integrate across spectral features and determine common measurements and moments for the line profile. *CALLING SEQUENCE:
G1BCKGND G1BCKGND Spectral Fitting *CATEGORY: Procedure to fit a linear baseline to data points. *CALLING SEQUENCE: G1BCKGND,X,Y,XL,XR,A,SIG
G1FIT Menu Procedure Spectral Fitting *CATEGORY: Procedure to fit gaussians and a linear baseline to data points (from GAUSSFIT.PRO) *CALLING SEQUENCE:
G2FIT Menu Procedrue Spectral Fitting *CATEGORY: Procedure to fit gaussians and a linear baseline to data points (from GAUSSFIT.PRO). *CALLING SEQUENCE:
G2_ARCHECK G2_ARCHECK Spectral Data Reduction *CATEGORY: Procedure to check wcenter (WIG) and width (WID) vectors for bad points & fix them (by removing elements or replacing values). *CALLING SEQUENCE:
GAUSS GAUSS (General IDL Library 01) Aug 19, 1979 numerical function *CATEGORY: *PURPOSE: TO CALCULATE A GAUSSIAN FUNCTION *CALLING SEQUENCE:
GAUSSFITS GAUSSFITS JUNE,1984 *CATEGORY: To fit Gaussians and a polynomial baseline to data points *CALLING SEQUENCE: GAUSSFITS,X,Y,NDEG,NCOMP,A,YFIT,SIG,comment,prnt=prnt *PARAMETERS:
GAUSSPSF Return a point spread function having Gaussian profiles, as either a 1D vector, a 2D image, or 3D volumetric-data.
GETBLEMW GETBLEMW (RDAF General Production Library) JAN 30, l983 Data Editing *CATEGORY: *PURPOSE: Prompts user for wavelength positions of blemishes that are to be plotted in the expanded regions when called by BSPOT.
GETIUE GETIUE 9 SEPTEMBER 1981 *CATEGORY: Extract data from IUESIPS spectrum format. *CALLING SEQUENCE: GETIUE,IMAGET,TYPE,ORDER,H,WAVE,FLUX,EPS,unit *PARAMETERS:
GETLIST GETLIST (General IDL Library 01) October 3, 1980 *CATEGORY: Procedure to read variables previously written by procedure SAVLIST. *CALLING SEQUENCE: GETLIST,FILNAM,DATA *PARAMETERS:
GETNUM GETNUM Input/output *CATEGORY: *PURPOSE: Routine to extract numbers from a string with various delimiters between the numbers. The delimiters can be anything and in any
GETPRO GETPRO AUG. 28, 1989 File copy utility *CATEGORY: To copy IDL procedure files to the current directory. *CALLING SEQUENCE: GETPRO,PROC_NAME,OUT_NAME,LIBRARY
GETRADEC GETRADEC Data Manipulation *CATEGORY: To extract the RA, DEC, and observation date from IUE disk files. *CALLING SEQUENCE: GETRADEC,IMAGET,RJD,RA,DEC
GETSAMP GETSAMP (General IDL Library 01) December 12, 1986 unit conversion *CATEGORY: *PURPOSE: To convert wavelength limits to nearest sample numbers. *CALLING SEQUENCE:
GEX1 GEX1 JANUARY 29, 1985 Spectral Fitting *CATEGORY: NEWSIPS/IUESIPS To fit cross-cuts of low dispersion spectra with a Gaussian function in order to determine the width and center positions of a
GEX2 GEX2 APRIL 1, 1985 Spectral Fitting *CATEGORY: To fit cross-cuts of low dispersion spectra with a Gaussian function in which only the height parameter is allowed to vary. The width and center positions are determined by
GEXCAL GEXCAL 2 OCTOBER 1987 Spectral Calibration *CATEGORY: To calibrate low dispersion spectral data extracted using the IUEDAC GEX routines with optional corrections for THDA sensitivity variation and sensitivity degradation.
GFILTER GFILTER numerical function *CATEGORY: *PURPOSE: To convolve a 1- or 2-dimensional gaussian point spread function with the specified input array.
GOCOPY GOCOPY (General IDL Library 01) 22-FEB-81 *CATEGORY: *PURPOSE: To copy one file from an input tape to an IUE GO-format disk file. *CALLING SEQUENCE: GOCOPY,IN,IMAGET,FNAME,NBYTES,NLINES
GOTORDAF *CATEGORY: *PURPOSE: To convert IUE GO-format (IUESIPS) disk files to RDAF-format disk files which have truncated data records (i.e. 2000 byte rather than 2048 byte records). *CALLING SEQUENCE:
GRIDTERP GRIDTERP (General IDL Library 01) 13 March, 1983 interpolation *CATEGORY: This is a linear interpolation procedure to operate properly on IUE data. The flux, gross, and back vectors are interpolated, but the eps vector is set to the minimum of the two relevant values.
GWREAD GWREAD (General IDL Library 01) OCTOBER 27, 1986 *PURPOSE: To set file protection for input file back to the default setting. This allows owner all privileges, group members execute (VMS only) and read privileges, and others/world read privilege only. *CALLING SEQUENCE:
HDUGEN HDUGEN 2/11/92 File Conversion *CATEGORY: Creates a FITS header and data unit (hdu) containing the specified input HEADER and FIMAGE array, and stores it in a FITS file called HDU.FIT. An optional keyword can be used to
HEXTODEC HEXTODEC *CATEGORY: Converts hexadecimal string to an integer (decimal) vector. *CALLING SEQUENCE: HEXTODEC,INSTR,OUTVEC,DIGITS *PARAMETERS:
HFIX HFIX AUGUST 29,1986 Utility, Data correction, reprocessing, and calibration. *CATEGORY: Allows user to add the ITF flag, exposure time, THDA sensitivity correction flag, and LWR sensitivity degradation correction flag to header record of IUE data files.
HISSORT1 HISSORT1.PRO Menu Procedure *CATEGORY: Procedure to print out relevant configuration items using specified selection criteria and HISTGRAPH.TAB *CALLING SEQUENCE:
HIST HIST (General IDL Library 01) statistics, histogram *CATEGORY: *PURPOSE: To generate a histogram plot of the distribution of values in the input array.
HITFIX HITFIX (General IDL Library 01) January 1990 data editing, image editing *CATEGORY: This procedure replaces an interactively defined "blemish" region with the average value from an interactively defined "background" region in the input image.
IBFIND IBFIND *CATEGORY: *PURPOSE: Searched the IUE Reference Databases for all entries which satisfy the search parameters. *CALLING SEQUENCE:
IBMENU IBMENU *CATEGORY: Menu routine for selecting search characteristics for the IUE Reference database. *CALLING SEQUENCE: IBMENU,CMD,QSEARCH
IBMENU1 IBMENU1 *CATEGORY: Main menu for IUE Reference Database search procedure. *CALLING SEQUENCE: IBMENU1,CMD *PARAMETERS:
IBMENU2 IBMENU2 *CATEGORY: Enter items for menu selection options 1-5. *CALLING SEQUENCE: IBMENU2,CMD,QS *PARAMETERS:
IBORDER *CATEGORY: Uses the IUEJRNL database's entry numbers to obtain the IUE article numbers and the IUE object numbers. *CALLING SEQUENCE: IBORDER,LIST,COUNT,ARTLIST,OBJLIST,ARTNUM,OBJNUM *PARAMETERS:
IBPRINT IBPRINT *CATEGORY: *PURPOSE: To provide printed information on the entries in the IUE Reference databases specified in the list specified. *CALLING SEQUENCE:
IBPRT12 IBPRT12 *CATEGORY: *PURPOSE: To provide printed information on the entries in the IUE Reference databases specified in the list specified. *CALLING SEQUENCE:
IBPRT3 IBPRT3 *CATEGORY: *PURPOSE: To provide printed information on the entries in the IUE Reference databases specified in the list specified. *CALLING SEQUENCE:
IBPRT5 *CATEGORY: To provide printed information on the entries in the IUE Reference databases specified in the list specified. *CALLING SEQUENCE: IBPRT5,OBJLIST,OBJNUM,FILEOUT *PARAMETERS:
IBSORT *CATEGORY: Procedure to sort data into ascending order, like a simple bubble sort. original subscript order is maintained when values are equal (FIFO). (This differs from the IDL SORT routine alone, which may rearrange order for equal values) *CALLING SEQUENCE:
IBVIEW IBVIEW Menu Procdure *CATEGORY: Procedure to list the search criteria for IUEREF. *CALLING SEQUENCE: IBVIEW,PFLAG,QS
IDBCIRCLE IDBCIRCLE *CATEGORY: Find sources in a database within a specified radius of a specified center. Database should include RA and DEC items and should previously be opened with IDBOPEN *CALLING SEQUENCE:
IDBCLOSE IDBCLOSE *CATEGORY: Procedure to close a data base file *CALLING SEQUENCE: IDBCLOSE,QDB,QITEMS,QDBREC *PARAMETERS:
IDBCREATE IDBCREATE *CATEGORY: Create new data base file or modify description. A database definition file (.DBD) file must already exist. The default directory must be a !iuer.database directory. *CALLING SEQUENCE:
IDBDATE *CATEGORY: Convert a date format of 25-mar-1980 21:40:00 to a Julian date, observation year (80), and observation day (85). *CALLING SEQUENCE: IDBDATE,OBSDAT,JULIAN,OBSYR,OBSDAY *PARAMETERS:
IDBEXT IDBEXT *CATEGORY: Procedure to extract values of up to 12 items from data base file, and place into IDL variables *CALLING SEQUENCE: IDBEXT,QDB,QITEMS,QDBREC,LIST,ITEMS,V1,v2,v3,v4,v5,v6,v7,v8,v9,
IDBEXT_DBF IDBEXT_DBF *CATEGORY: Procedure to extract values of up to 12 items from a data base file. This is a subroutine of IDBEXT, which is the routine a user should normally use. *CALLING SEQUENCE:
IDBEXT_IND IDBEXT_IND *CATEGORY: Routine to read a indexed item values from index file *CALLING SEQUENCE: IDBEXT_IND,QDB,QITEMS,LIST,ITEM,DBNO,VALUES *PARAMETERS:
IDBFIND IDBFIND *CATEGORY: Procedure to search data base for entries with specified search characteristics. *CALLING SEQUENCE: IDBFIND,QDB,QITEMS,QDBREC,SPAR,RESULT,COUNT,listin,silent=silent
IDBFINDE IDBFINDE (formerly IDBFIND_ENTRY) *CATEGORY: This is a subroutine of idbfind and is not a standalone procedure It performs a entry number search. *CALLING SEQUENCE: IDBFINDE,TYPE,SVALS,NENTRIES,VALUES,COUNT
IDBFINDS IDBFINDS (formerly IDBFIND_SORT) *CATEGORY: This is a subroutine of IDBFIND and is not a standalone procedure *CALLING SEQUENCE: IDBFINDS,QDB,QITEMS,IT,TYPE,SVALS,LIST,NUMBER *PARAMETERS:
IDBFPARSE IDBFPARSE *CATEGORY: Subroutine of IDBFIND *CALLING SEQUENCE: IDBFPARSE,SPAR,ITEMS,STYPE,VALUES *PARAMETERS:
IDBGET IDBGET *CATEGORY: Find entry number of fields which contain specified values in a specified item. IDBGET is an altnerative to IDBFIND when the desired search values are not easily expressed as a string. *CALLING SEQUENCE:
IDBHELP IDBHELP *CATEGORY: Procedure to either list available databases (if no database is currently open) or the items in the currently open database. *CALLING SEQUENCE: IDBHELP,QDB,QITEMS,flag,textout=textout
IDBIDXBL IDBIDXBL (formerly IDBINDEX_BLK) *CATEGORY: To set up an associated variable of the correct data-type and offset into the file by some amount in preparation for writing to the file. *CALLING SEQUENCE: IDBIDXBL,UNIT,NB,BSZ,OFB,DTYPE,RES
IDBINDEX IDBINDEX *CATEGORY: Procedure to create index file for data base *CALLING SEQUENCE: IDBINDEX,QDB,QITEMS,QDBREC,items *PARAMETERS:
IDBITINF IDBITINF (formerly IDB_ITEM_INFO) *CATEGORY: Routine to return information on selected item(s) in the opened data bases. *CALLING SEQUENCE: IDBITINF,QITEMS,REQUEST,RESULT,itnums
IDBMATCH IDBMATCH *CATEGORY: Find one entry number in a database for each element in a vector of item values. IDBMATCH is especially useful for finding a one-to-one correspondence between entries in different databases, and thus to create the vector needed for database pointers.
IDBOPEN IDBOPEN *CATEGORY: Routine to open data base files. *CALLING SEQUENCE: IDBOPEN,QDB,QITEMS,QDBREC,name,update *PARAMETERS:
IDBPRINT IDBPRINT *CATEGORY: Procedure to print specified items from a list of database entries *CALLING SEQUENCE: Give full screen menu of print items to select IDBPRINT,QDB,QITEMS,QDBREC,LIST
IDBPUT IDBPUT *CATEGORY: Procedure to place a new value for a specified item into a data base file entry. *CALLING SEQUENCE: IDBPUT,QDB,QITEMS,QDBREC,ITEM,VAL,ENTRY
IDBRADEC *CATEGORY: Format and error check the R.A. and Declination fields. *CALLING SEQUENCE: IDBRADEC,RA,DEC *PARAMETERS: RA (REQ) (I/O) (string)
IDBRD *CATEGORY: Procedure to read an entry from a data base file or from linked multiple databases. *CALLING SEQUENCE: IDBRD,QDB,QITEMS,QDBREC,ENUM,ENTRY,available,dbno *PARAMETERS:
IDBSEARCH IDBSEARCH *CATEGORY: Search a vector for specified values This is a subroutine of IDBFIND and is not a standalone procedure *CALLING SEQUENCE: IDBSEARCH,TYPE,SVALS,VALUES,GOOD,COUNT
IDBSORT IDBSORT *CATEGORY: Routine to sort list of entries in data base *CALLING SEQUENCE: IDBSORT,QDB,QITEMS,QDBREC,LIST,ITEMS,RESULT,reverse = rev *PARAMETERS:
IDBSUNTOHOST IDBSUNTOHOST *CATEGORY: Routine to convert SUN database files to the host computer form. Needed for machines that do not implement the IEEE standard such as VAXes and Decstations. Requires that the ASCII .dbd file and the binary .dbf file already be present in the current directory,
IDBTITLE IDBTITLE *CATEGORY: Create title line for routine IDBPRINT. *CALLING SEQUENCE: IDBTITLE,C,F,RESULT *PARAMETERS:
IDBVAXTOSUN IDBVAXTOSUN *CATEGORY: Routine to convert VAX database (.dbf) file to the SUN form. *CALLING SEQUENCE: IDBVAXTOSUN,NAME *PARAMETERS:
IDBWRT IDBWRT *CATEGORY: Procedure to update or add a new entry to a data base *CALLING SEQUENCE: IDBWRT,QDB,QITEMS,QDBREC,ENTRY,index,append *PARAMETERS:
IDBXPUT IDBXPUT *CATEGORY: Routine to replace value of an item in a data base entry *CALLING SEQUENCE: IDBXPUT,VAL,ENTRY,IDLTYPE,SBYTE,NBYTES *PARAMETERS:
IDBXVAL IDBXVAL *CATEGORY: Procedure to quickly return a value of the specified item number from the entry *CALLING SEQUENCE: IDBXVAL,ENTRY,IDLTYPE,NVALUES,SBYTE,NBYTES,RESULT
IDB_INFO IDB_INFO *CATEGORY: Procedure to obtain information on opened data base file(s). *CALLING SEQUENCE: 1) IDB_INFO,QDB,QITEMS,REQUEST,RESULT 2) IDB_INFO,QDB,QITEMS,REQUEST,RESULT,dbname
IDB_ITEM IDB_ITEM *CATEGORY: Procedure to return the item numbers and other information of a specified item name *CALLING SEQUENCE: IDB_ITEM,QDB,QITEMS,ITEMS,ITNUM,ivalnum,idltype,sbyte,numvals,nbytes
IDB_OR IDB_OR *CATEGORY: Combine two vectors of entry numbers, removing duplicate values. IDB_OR can also be used to remove duplicate values from any longword vector *CALLING SEQUENCE:
IDFILE IDFILE February 10, 1988 File Access *CATEGORY: Identify an IUE GO-format tape file, go-format disk file, or an RDAF-format .lab file, and optionally return information extracted from the label.
IDT IDT.PRO JANUARY, 1981 File Transfer *CATEGORY: To identify an IUE tape file from the 1st block of the label and create the disk file name IMAGET from the specified input parameters. *CALLING SEQUENCE:
IFILEPATH IFILEPATH *CATEGORY: File Management. Given the name of a file in the IDL distribution, IFILEPATH returns the fully-qualified path to use in opening the file. Operating system dependencies are taken into consideration.
IFITSRD IFITSRD *CATEGORY: To read a FITS formatted disk file and convert data into IDL variables. *CALLING SEQUENCE: IFITSRD,FILENAME,ROW,MAINHD,EXHD,p1,p2,...,p15,erec=rn,silent=silent, efld=efld,nvla=nvla
IFITSWRT IFITSWRT 6/02/93 File Conversion *CATEGORY: To write IDL variables to a FITS format disk file using the Binary Table extension. *CALLING SEQUENCE:
IGCIRC IGCIRC *CATEGORY: Computes rigorous great circle arc distances. *CALLING SEQUENCE: IGCIRC,U,RA1,DC1,RA2,DC2,DIS *PARAMETERS:
IMATCH IMATCH *CATEGORY: Routine to match values in two vectors. *CALLING SEQUENCE: IMATCH,A,B,SUBA,SUBB *PARAMETERS:
IMFITS IMFITS 11/30/90 File Conversion *CATEGORY: Converts RDAF-format IUE image files (i.e., RI, PI, LBL & FES files) to primary array FITS-format disk files. Optionally, the epsilon array associated with PI and LBL files can be added as an IMAGE extension.
IMXGEN IMXGEN 2/11/92 File Conversion *CATEGORY: Creates a FITS IMAGE extension (header and data) containing the specified input HEADER and FIMAGE array, and appends it to the input FITS file (FNAME).
INTDAFMT INTDAFMT system dependancies - internal data format *CATEGORY: Determine the system's internal data format. *CALLING SEQUENCE: INTDAFMT,TYPE,RMS
INTEG INTEG OCTOBER 3, 1980 integration *CATEGORY: *PURPOSE: To numerically integrate tabulated data using the trapezoid rule. *CALLING SEQUENCE:
INTIME INTIME Utility *CATEGORY: Procedure to prompt user for exposures times (for programs like IUESPEC) and write results to header record. *CALLING SEQUENCE:
IPDATA IPDATA MAY 17, 1985 Data Extraction *CATEGORY: To extract image data, scheme name, aperture type and processing date from an IUE image header label. *CALLING SEQUENCE:
IPINFO IPINFO MAY 20, 1985 Data Extraction *CATEGORY: IUESIPS NEWSIPS To extract and display image processing information from the IUESIPS .lab files or the NEWSIPS fits files.
IPI_LISI IPI_LISI *CATEGORY: IUESIPS NEWSIPS Select and print label information. *CALLING SEQUENCE: IPI_LISI,A,ACC,NPARI,PRIN
IPI_LISP IPI_LISP Menu Procedure *CATEGORY: IUESIPS NEWSIPS List optional sorts for routine IPINFO. *CALLING SEQUENCE:
IPI_PAR12 IPI_PAR12 Menu Procedure *CATEGORY: Prompt user for directory file name and read disk and UIC. *CALLING SEQUENCE: IPI_PAR12,FN
IPLIST IPLIST 15-FEB-84 Menu Procedure *CATEGORY: To list out relevant iuesips configuration entries based on selection criteria input by user (i.e. camera, dispersion, etc.) *CALLING SEQUENCE:
IPL_HISSORT IPL_HISSORT Menu Procedure *CATEGORY: Procedure to print out relevant configuration items. *CALLING SEQUENCE: IPL_HISSORT,CONFIG,SC,ENTRY
IPL_LIST IPL_LIST Menu Procedure *CATEGORY: Write out users choices. *CALLING SEQUENCE: IPL_LIST,SC,OBS
IPL_SELECT IPL_SELECT Menu Procedure *CATEGORY: Returns user-specified selection criteria. *CALLING SEQUENCE: IPL_SELECT,SC
IPREMAT *CATEGORY: Return the precession matrix from EQUINOX1 to EQUINOX2. This matrix is used by the procedures PRECESS and BARYVEL to precess astronomical coordinates *CALLING SEQUENCE: IPREMAT,EQUINOX1,EQUINOX2,R,FK4=FK4
IPS Convert input image array to a color postscript file using landscape mode. *CALLING SEQUENCE: IPS,IMAGE,ctab=num,cbar=cbar,maxsize=ms *PARAMETERS: IMAGE (REQ) (I) (2) (BILF)
IREAD_KEY IREAD_KEY *CATEGORY: To read a keystroke and return its ASCII equivalent, unless an ESCAPE sequence was produced. In that case, if the sequence is recognized, a code is returned. *CALLING SEQUENCE:
IREVERSE Array manipulation. *CATEGORY: Reverse the order of rows or columns in an array or vector. *CALLING SEQUENCE: IREVERSE,ARRAY,RESULT,subscript_index *PARAMETERS:
ISCREEN_SELECT ISCREEN_SELECT *CATEGORY: Routine to allow a user to make an interactive screen selection from a list (array) of strings. This procedure determines whether to use the x-windows version or the non-x-windows version by examining the !d.name system variable.
ISCRSELO ISCRSELO (formerly ISCREN_SELECT_O) *CATEGORY: Routine to allow a user to make an interactive screen selection from a list (array) of strings. This assumes a non-x-windows device. *CALLING SEQUENCE: ISCRSELO,SELECTIONS,ISELECTED,N_SELECT,comments,command_line,only_one
ISCRSELX ISCRSELX (formerly ISCREN_SELECT_X) *CATEGORY: Routine to allow a user to make an interactive screen selection from a list (array) of strings. This assumes an x-windows device. *CALLING SEQUENCE: ISCRSELX,SELECTIONS,ISELECTED,N_SELECT,comments,command_line,only_one
ISCR_ATTRIB ISCR_ATTRIB *CATEGORY: To set the screen attribute to those given, in the given order. *CALLING SEQUENCE: ISCR_ATTRIB,a1,a2,a3,a4,a5 *PARAMETERS:
ISCR_CURPOS ISCR_CURPOS *CATEGORY: To position the cursor at the specified screen location. Unspecified coordinates are set to one. Please note that the ESCAPE sequence expects the coordinates to be counted from (1,1). *CALLING SEQUENCE:
ISCR_ERASE ISCR_ERASE *CATEGORY: To erase portions of the terminal screen. *CALLING SEQUENCE: ISCR_ERASE,cmd *PARAMETERS:
ISCR_OTHER ISCR_OTHER *CATEGORY: To allow the user to issue any ESCAPE sequence. *CALLING SEQUENCE: ISCR_OTHER,STR *PARAMETERS:
ISDEC ISDEC *CATEGORY: Converts declination and declination tolerance entered in ISMENU3 to decimal degress if necessary and does error checking. *CALLING SEQUENCE: ISDEC,USERSTRG,TYPFLG,SRCHVAL
ISELW[1] ISELW (formerly ISELECT_W) *CATEGORY: This procedure creates a non-exclusive menu of items in widget form. More than one item may be selected or 'de-selected'. Normally called by ISCREEN_SELECT *CALLING SEQUENCE:
ISELW[2] ISELW_EVENT (formerly ISELECT_W_EVENT) Embedded file for ISELW *CATEGORY: This procedure is the event handler for the XMENU widget below *CALLING SEQUENCE: ISELW_EVENT,EVENT
ISELW[2] ISELW
ISEXPTIME ISEXPTIME *CATEGORY: Create the search string for the exposure time. *CALLING SEQUENCE: ISEXPTIME,USERSTRG,SRCHSTRG *PARAMETERS:
ISFIND ISFIND *CATEGORY: *PURPOSE: Searched the IUELOG and IUEFES databases for all entries which satisfy the search parameters. *CALLING SEQUENCE:
ISMENU ISMENU *CATEGORY: Menu routine for selecting search characteristics for the merged observing log. *CALLING SEQUENCE: ISMENU,CMD,QSEARCH
ISMENU1 ISMENU1 *CATEGORY: Main menu for merged observing log menu selection procedure. *CALLING SEQUENCE: ISMENU1,CMD *PARAMETERS:
ISMENU2 ISMENU2 *CATEGORY: Enter items for menu selection options 1-6. *CALLING SEQUENCE: ISMENU2,CMD,QS *PARAMETERS:
ISMENU3 ISMENU3 *CATEGORY: Procedure to execute command numbers 7-12 of the menu routine. *CALLING SEQUENCE: ISMENU3,CMD,QS *PARAMETERS:
ISMENU4 ISMENU4 *CATEGORY: Procedure to execute command numbers 13-15 and 19 of the menu routine. *CALLING SEQUENCE: ISMENU4,CMD,QS
ISNDADS ISNDADS *CATEGORY: IUESIPS NEWSIPS *PURPOSE: To allow the user to request images from the NDADS IUE archive using database information obtained in SEARCH.
ISPRINT ISPRINT *CATEGORY: *PURPOSE: To provide printed information on the entries in the merged observing log specified in the list specified. *CALLING SEQUENCE:
ISPRTFULL ISPRTFULL *CATEGORY: *PURPOSE: To provide printed information on the entries in the merged observing log specified in the list specified. *CALLING SEQUENCE:
ISPRTOWN ISPRTOWN *CATEGORY: *PURPOSE: To access or create a user created print format for use with the IUELOG database and the IDL procedure IDBPRINT. *CALLING SEQUENCE:
ISRA *CATEGORY: Converts right ascension and right ascension tolerance entered in ISMENU3 to decimal degress if necessary and does error checking. *CALLING SEQUENCE: ISRA,USERSTRG,TYPFLG,RABEG *PARAMETERS:
ISUSRREQ database/request interface *CATEGORY: To allow the user to request IUE images to be reprocessed in NEWSIPS using database information obtained in SEARCH. *CALLING SEQUENCE: ISUSRREQ,IUELIST,IUENUM
ISVIEW ISVIEW Menu Procdure *CATEGORY: Procedure to list the search criteria. *CALLING SEQUENCE: ISVIEW,PFLAG,QS,output,tofile=tofile
ITEXTCLOSE ITEXTCLOSE *CATEGORY: Procedure to close file for text output as specifed by !iuetextout. *CALLING SEQUENCE: ITEXTCLOSE,textout=textout *PARAMETERS:
ITEXTOPEN ITEXTOPEN *CATEGORY: Procedure to open file for text output as specified by !iuetextout. *CALLING SEQUENCE: ITEXTOPEN,PROGRAM,textout=textout *PARAMETERS:
ITFFLAG ITFFLAG 1-6-88 IUE Data Correction *CATEGORY: Determines which ITF file was used in processing input image and sets appropriate flag in record 0 of data file. *CALLING SEQUENCE:
ITIFF_ADD_TAG ITIFF_ADD_TAG *CATEGORY: Add a tag to the Image File Directory (IFD). *CALLING SEQUENCE: ITIFF_ADD_TAG,LUN,IFD,COUNT,TAG,VALUE *PARAMETERS:
ITIFF_WRITE ITIFF_WRITE *CATEGORY: Input/output. Write 8-bit or 24-bit images in TIFF format. *CALLING SEQUENCE: ITIFF_WRITE,FILENAME,ARRAY,orientation,red=r,green=g,blue=b, $
IUE3DRD IUE3DRD *CATEGORY: To read up to 15 columns from the specified row of a FITS binary table. *CALLING SEQUENCE: IUE3DRD,FILENAME,ROW,SREC,B3DH,COL1,col2,...col15,silent=silent,efld=efld ,npts=npts
IUEADSTR IUEADSTR (formerly ADSTRING) *CATEGORY: Return RA and Dec as character string in sexigesimal format. RA and Dec may be entered as either a 2 element vector or as 2 scalars. *CALLING SEQUENCE:
IUEARRD *CATEGORY: To read a primary array or image extension array from an IUE FITS disk file. *CALLING SEQUENCE: IUEARRD,FILENAME,STARTR,HEADER,IMAGE *PARAMETERS:
IUEASTRO IUEASTRO (formerly ASTRO) *CATEGORY: Interactive astronomical utility Interactive astronomical utitlity for precession and coordinate conversion. *CALLING SEQUENCE:
IUEATRD IUEATRD *CATEGORY: To read up to 15 columns from one row of a FITS ASCII table. *CALLING SEQUENCE: IUEATRD,FILENAME,ROW,SREC,HEAD,COL1,COL2,...COL15,silent=silent *PARAMETERS:
IUEBETA IUEBETA (formerly BETA) *CATEGORY: This program computes beta and roll for the first day of each month during the year. Equations are taken from Schiffer's "IUE Orientation" in IUE Newsletter No. 9. codes are assigned to indication hot and cold betas.
IUECOORD IUECOORD (formerly COORD) *CATEGORY: This program converts astronomical coordinates into RA and DEC in degrees. It is primarily called by other routines. *CALLING SEQUENCE: IUECOORD,RH,RM,RS,DD,DM,DS,ASC,DEC
IUECOPY IUECOPY (ORIGINAL VERSION WRITTEN MARCH 16,1981) File Transfer *CATEGORY: Copies and/or converts selected IUE images as follows: 1) copies and converts IUE go-format tape files to RDAF-format disk files (i.e. creates .dat and .lab files)
IUEDAF *CATEGORY: Determine if the IUEDAC keyword has been added to the main fits header. If not, it attempts to add it. *CALLING SEQUENCE: IUEDAF,MAIN,FLAG,/date,/silent,/override *PARAMETERS:
IUEDFF IUEDFF *CATEGORY: IUESIPS NEWSIPS To convert IUE image files to various disk file formats. *CALLING SEQUENCE: IUEDFF,IMAGET,IMAGE,ifmt=m,ofmt=n,ctab=num,filename=filename
IUEDISPLAY IUEDISPLAY To read IUE image files (IUESIPS or NEWSIPS) and display on one of the following image display devices: 'IVAS' (requires optional IDL IVAS driver from RSI) 'X' any x-windowing device 'MAC' Macintosh
IUEEULER IUEEULER (formerly EULER) *CATEGORY: Transform between galactic, celestial, and ecliptic coordinates. Use the procedure IUEASTRO to use this routine interactively *CALLING SEQUENCE: IUEEULER,AI,BI,select
IUEFETCH IUEFETCH AUGUST 28, 1980 Menu Procedure *CATEGORY: Retrieve data from a file created by IUESAVE. *CALLING SEQUENCE: IUEFETCH,NAME,H,WAVE,FLUX,EPS
IUEFHMOD IUEFHMOD *CATEGORY: To modify keywords in the primary header of a FITS file. *CALLING SEQUENCE: IUEFHMOD,FILENAME,KEYWORD,VALUE
IUEFHRD IUEFHRD *CATEGORY: To read the header(s) of a FITS disk file, extract the keywords (and IUE label if present) as IDL string arrays, and determine the overall structure of the file. Up to 4 extension headers can be extracted, although the entire file is read.
IUEFTYPE *CATEGORY: Determines the file type for both NEWSIPS FITS files and IUESIPS rdaf-format files. *CALLING SEQUENCE: IUEFTYPE,FILENAME,TYPE *PARAMETERS:
IUEFX IUEFX *CATEGORY: To submit an IUE archive request using either the NDADS REQUEST command or the IBM archive request procedure. IUESIPS files are automatically converted to RDAF format, NEWSIPS files are left in FITS format. Requested files are transferred to the specified
IUEGET IUEGET 8 JANUARY 1981 Data Extraction *CATEGORY: To acquire spectral data for a given order from an IUESIPS diskfile. *CALLING SEQUENCE: IUEGET,LUN,M,H,WAVE,FNET,EPS
IUEGETOPT IUEGETOPT (FORMERLY GETOPT) *CATEGORY: Procedure to convert a user's response string into a valid scalar or vector. Distinct elements in the string may be separated by either a comma or a space. The output scalar or vector can be specified to be either integer or floating
IUEGETTOK IUEGETTOK (formerly GETTOK) *CATEGORY: Procedure to retrieve the first part of the string until the character char (input parameter) is encountered. *CALLING SEQUENCE: IUEGETTOK,ST,CHAR,OUT
IUEGOFIX *CATEGORY: Replaces the values removed by IUECOPY. (Finds the minimum and maximum wavelengths, and the number of points per record that need to be inserted into the go-file written by IUETAPE.) *CALLING SEQUENCE: IUEGOFIX,LUNI,HLINE,NRECS,WMIN,WMAX,NUMPTS
IUEHI3 IUEHI3 JANUARY 14, 1981 Spectral Data Reduction *CATEGORY: To acquire high-dispersion data for 3 spectral orders and to correct interactively the fluxes for echelle vignetting. *CALLING SEQUENCE:
IUEIM IUEIM JUNE 15, 1981 Data Extraction *CATEGORY: To extract a horizontal or vertical swath from an IUESIPS low-dispersion line-by-line image file. *CALLING SEQUENCE:
IUELAB12 IUELAB12 (formerly IUELABEL_LIN12) Menu Procedure *CATEGORY: Print first 2 lines of iue label . *CALLING SEQUENCE: IUELAB12,NH,H,ncam
IUELAB4 IUELAB4 (formerly IUELABEL_LIN4) Menu Procedure *CATEGORY: Print fourth line of iueplot annotation. *CALLING SEQUENCE: IUELAB4,NH,H
IUELCT Color Table Manipulation *CATEGORY: Load color tables of image display. *CALLING SEQUENCE: IUELCT,filenm,ir,ig,ib,notv=num *PARAMETERS:
IUELIB IUELIB *CATEGORY: Defines the default system variables for the IUE RDAF software. *CALLING SEQUENCE: IUELIB *PARAMETERS:
IUEMERGE IUEMERGE NOVEMBER 16, 1981 Menu Procedure Spectral Data Reduction *CATEGORY: Merge, average, or splice two wave-flux-flag (eps or nu flag) triplets or two wave-flux pairs.
IUEOBS IUEOBS (IUE Production Library) (01 April 1988) (formerly named OBSPLAN) *CATEGORY: This program allows the observer to compute beta, roll, and position angle of the large apertures for his target on a specific day. The interactive options allow repeated calculations for various days
IUEPLAN IUEPLAN (formerly TARGET) *CATEGORY: This program computes the beta and roll for the first day of the month throughout the year for a given target. The results are listed and plotted for easy examination. The format is intended to aid in overall planning and scheduling.
IUEPLOT IUEPLOT 8 JANUARY 1981 Spectral Display *CATEGORY: To plot an IUE spectrum with labels as derived from the IUE header record, erroneous data-points marked by X's, and points where vectors were combined marked on X-axis by a '+'.
IUEPRECESS IUEPRECESS (formerly PRECESS) *CATEGORY: Precess coordinates from EQUINOX1 to EQUINOX2. For interactive display, one should use IUEASTRO which calls IUEPRECESS. *CALLING SEQUENCE: IUEPRECESS,RA,DEC,EQUINOX1,EQUINOX2,PRINT=PRINT,FK4=FK4
IUEPROG iueprog To read the IUEPROG database and extract information matching the specified program ID(s), episode(s), and/or name(s) of PI(s). *CALLING SEQUENCE: IUEPROG,PID,ep,lname,fname,affil,title,srch=srch,file=file,/silent *PARAMETERS:
IUEQICTAPE IUEQICTAPE MAR. 15, 1981 File Format Conversion *CATEGORY: To copy RDAF-format IUE disk files to a QIC 1/4 inch cartridge tape in IUE G.O. format. *CALLING SEQUENCE:
IUEQ_STRING IUEQ_STRING *CATEGORY: To get a string from the keyboard without echoing it to the screen. *CALLING SEQUENCE: IUEQ_STRING,ST *PARAMETERS:
IUERADEC IUERADEC (formerly RADEC) *CATEGORY: To convert right ascension and declination from decimal degrees to sexigesimal hours (for R.A.) and degrees( for Dec.). *CALLING SEQUENCE: IUERADEC,RA,DEC,IHR,IMIN,XSEC,IDEG,IMN,XSC
IUEREAD *CATEGORY: Read IUE files. Returns the primary fits keywords or label, image, NEWSIPS flags or IUESIPS epsilons (if applicable), wavelength (if appicable), and sigmas (if applicable). If the keyword is set, returns the IUESIPS scale factor record (if applicable). *CALLING SEQUENCE:
IUEREF IUEREF *CATEGORY: To search the IUE Reference databases (IUEJRNL, ALIAS, and IUECOAU) using user specified search parameters. *CALLING SEQUENCE: IUEREF,RESET,artliat,objlist
IUERIPPLE IUERIPPLE (IUE Experimental Library) July 22, 1988 IUE calibration *CATEGORY: To calculate the echelle rippple parameters K and ALPHA for order M for a given IUE spectrum. *CALLING SEQUENCE:
IUESAT *CATEGORY: Procedure to draw a picture of the IUE satellite. *CALLING SEQUENCE: IUESAT,SCALE *PARAMETERS: SCALE (REQ) (I) (0) (B I L F D)
IUESAVE IUESAVE AUGUST 28, 1980 File Transfer *CATEGORY: Save IUESIPS data on a disk file for later retrieval by IUEFETCH. *CALLING SEQUENCE: IUESAVE,NAME,H,WAVE,FLUX,EPS,flag
IUESCHPLT2 IUESCHPLT2 (formerly SCHPLT2) *CATEGORY: This program plots beta and roll in a standard format for scheduling. *CALLING SEQUENCE: IUESCHPLT2,BETA,ROLL,MONTH
IUESIXTY IUESIXTY (formerly SIXTY) *CATEGORY: Converts decimal number to sexigesimal. Reverse of IUETEN procedure. *CALLING SEQUENCE: IUESIXTY,SCALAR,RESULT *PARAMETERS:
IUESOLEPH IUESOLEPH (IUE Production Library) (01 April 1988) (formerly SOLEPH) *CATEGORY: This program computes solar position for day of year in 1950 coordinates. Day can be decimal or array. Based on RJPSUN by BOB PANEK and earlier version of soleph by C.L. IMHOFF
IUESPEC IUESPEC (IUE Production Library) 14 July 1989 *CLASS: IUE data extraction, calibration *CATEGORY: *PURPOSE: To read IUESIPS extracted spectral data for either low or high
IUETAPE IUETAPE MAR. 15, 1981 File Format Conversion *CATEGORY: To write an IUE disk file to tape. To copy RDAF-format (*.lab and *.dat files) or GO-format (*.go) IUE disk files to tape in IUE G.O. format.
IUETEN IUETEN (formerly TEN) *CATEGORY: Converts sexigesimal number to decimal. Inverse of IUESIXTY procedure. *CALLING SEQUENCE: IUETEN,RESULT,[HOUR_OR_DEG,MIN,SEC] IUETEN,RESULT, HOUR_OR_DEG,MIN,SEC
IUETERP interpolation *CATEGORY: IUESIPS NEWSIPS This is a linear interpolation procedure. The keywords allow it to operate properly on IUE data. The parmaeters VECT2 through VECT6 vectors are interpolated. The vector entered via the EPS keyword is
IUEUNITAPE IUEUNITAPE MAR. 15, 1981 File Format Conversion *CATEGORY: To copy RDAF-format IUE disk files to 1/2 inch 9-track tapes (Xylogics 472 or SCSI controllers) or 8mm Exabyte tapes in IUE GO-format.
IUEVEL IUEVEL Data Correction *CATEGORY: To determine the velocities of IUE in the x, y, and z directions at the given time with the appropriate set of orbital elements. The output velocities will reside in a three element array called v.
IUEZPARCH IUEZPARCH (formerly ZPARCHECK) *CATEGORY: Routine to check user parameters to a procedure *CALLING SEQUENCE: IUEZPARCH,PROGNAME,PARAMETER,PARNUM,TYPES,DIMENS,message *PARAMETERS:
IUE_CONVORD IUE_CONVORD (IUE Experimental Library ) 22 July 1988 *CATEGORY: To convert from wavelength to spectral order number for IUESIPS high dispersion IUE spectra. *CALLING SEQUENCE: IUE_CONVORD,CAMERA_ID,LAMBDA,SPEC_ORDER
IUE_PARSE IUE_PARSE (IUE Production Library) 01 August 1988 *PURPOSE: To parse an IUE-specific file name into the full set of components comprising it. *CALLING SEQUENCE: IUE_PARSE,FILENAME,DISK,PATH,CAM,IMAGE,TYPE,APER,EXTN,VERSION
IUE_SCATTER IUE_SCATTER *CATEGORY: Program to simulate the grating scattering in an FUV spectro-graph: reads in an assumed initial spectrum and "scatters" it through an assumed grating profile. Output is scattered spectrum. This version is for the IUE SWP cross disperser, and follows the procedure
IUNJD *CATEGORY: Takes the Julian date given by JULDATE and gives the equivalent year, day of year, month, day of month, hour, and minute values. *CALLING SEQUENCE: IUNJD,JD,DATARR *PARAMETERS:
IVAX_TO_SUN IVAX_TO_SUN *CATEGORY: To convert VAX IDL data types to Sun IDL data types. *CALLING SEQUENCE: IVAX_TO_SUN,VARIABLE *PARAMETERS:
JOUPLOT JOUPLOT *CATEGORY: This file is meant to be used as a batch input file at the interactive idl level. It will produce hard copy of journaled graphics output on the printer defined by the !iueprint. *CALLING SEQUENCE:
JULDATE JULDATE unit conversion *CATEGORY: *PURPOSE: Convert from calender to Reduced Julian Date *CALLING SEQUENCE:
KANDP KANDP Database Access *CATEGORY: This procedure searches through the Kelly and Palumbo database for identified spectral lines which satisfy the input search criteria. It is intended for use as an aid in line identification.
KEYGEN KEYGEN 9/13/90 File Conversion *CATEGORY: Creates an IDL string array of FITS keywords from either an IUE header record or by evaluating an input IDL variable. *CALLING SEQUENCE:
KEYWORD *CATEGORY: To search IUELIB.INV, EXPR.INV, and CURDAF.INV for the given string. *CALLING SEQUENCE: KEYWORD,STRG,outfile *PARAMETERS: STRG (REQ) (I)
KLINEAR klinear To interpolate two dimensional Kurucz models to different temperatures. *CALLING SEQUENCE: KLINEAR,TK,T,FK,F,vk,v,bk,b *PARAMETERS: TK (req) (i) (1) (il)
KMENU *CATEGORY: Menu routine for selecting search characteristics for the 1991 Kurucz Models. *CALLING SEQUENCE: KMENU,CMD,RESET *PARAMETERS:
KMENU1 KMENU1 *CATEGORY: *CALLING SEQUENCE: KMENU1,CMD *PARAMETERS: CMD (REQ) (I) (0) (I)
KOPT *CATEGORY: Enter items for menu selection options 1-12. *CALLING SEQUENCE: KOPT,CMD,QS *PARAMETERS: CMD (REQ) (I) (0) (I)
KSCALE kscale To scale Kurucz model(s) to input data using the V magnitude(s). *CALLING SEQUENCE: KSCALE,W,F,FK,VK,tk,rms,weight=weight,comment=comment,/go,/noplots *PARAMETERS: w (req) (i) (1) (f)
KURGET kurget To extract the kurucz models for the given temperatures, log g, and log z values. The models extracted will be the "new" Kurucz models. *CALLING SEQUENCE: KURGET,WK,FK,tk,gk,zk,vk,bv,ub,nlc,nhe,bc,srch=srch *PARAMETERS:
KURGET1 kurget1 To extract the kurucz model for the given temperature, log g, and log z values. The models extracted will be the "new" Kurucz models. *CALLING SEQUENCE: KURGET1,WK,FK,tk,gk,zk,vk,bv,ub,nlc,nhe,bc,/interpolate *PARAMETERS:
KURUCZ KURUCZ JULY 1, 1983 Model Comparison *CATEGORY: *PURPOSE: Generates Kurucz fluxes and continuum for the 284 models presented in AP J SUPPL 40,1,1979.
KURUCZ91 Model Comparison *CATEGORY: Generates Kurucz fluxes and continuum for the 1991 Kurucz models. *CALLING SEQUENCE: KURUCZ91,RESET,wave,flux,teff,log_g,log_z,v,bv,ub,nlyc,nhe,bol_corr, $
KVIEW KVIEW Menu Procdure *CATEGORY: Procedure to list the search criteria. *CALLING SEQUENCE: KVIEW,PFLAG,QS
LABEL LABEL MARCH 1, 1981 Spectral Display *CATEGORY: IUESIPS NEWSIPS To print selected lines of an IUE vicar label at the user's terminal. *CALLING SEQUENCE:
LABMOD LABMOD (RDAF General Production Library) NOVEMBER 24, 1980 Extraction/Format Conversion *CATEGORY: *PURPOSE: Add a line to a vicar label disk file. *CALLING SEQUENCE:
LABT LABT 8 JANUARY 1981 *CATEGORY: To extract and display the temperature information stored in the camera snapshots section and the spacecraft snapshot section of an IUE image header label. LABT,IMAGET
LAB_TCON LAB_TCON *CATEGORY: Converts scaled THDA label information to actual temperatures in degrees Celsius. *CALLING SEQUENCE: LAB_TCON,LIN,TOUT
LBL LBL 28 December 1984 Spectral Display *CATEGORY: To make a pseudo 3-D display of the line by line file. *CALLING SEQUENCE: LBL,IMAGET,LINE,NUM,clip=(value)
LBLFIX LBLFIX (RDAF Production Library) Jan. l990 Data Editing *CATEGORY: IUESIPS NEWSIPS *PURPOSE: To interactively replace bright spots or cosmic ray hits in an IUESIPS
LINEID LINEID (General IDL Library 01) NOVEMBER 3, 1989 Spectral lines, identification *CATEGORY: *PURPOSE: To search the Kelly & Palumbo line list for identified UV spectral lines within a given range of wavelengths. This procedure provides a
LINFIT LINFIT (General IDL Library 01) June, 1984 Curve Fitting *CATEGORY: To make a least squares fit to data with a straight line: Y = A + B*X (IDL version of Bevington's LINFIT program) *CALLING SEQUENCE:
LINTERP LINTERP (General IDL Library 01) MARCH 15, 1981 Interpolation *CATEGORY: *PURPOSE: To linearly interpolate tabulated data from one data grid to another. *CALLING SEQUENCE:
LORFIT lorfit To calculate Lorentzian profiles. *CALLING SEQUENCE: LORFIT,X,A,Y *PARAMETERS: X (req) (i) (1) (bilfd)
LSPOS Spectral Analysis *CATEGORY: IUESIPS Calculates line and sample positions from wavelengths, order number, and dispersion constants. *CALLING SEQUENCE:
LTI *CATEGORY: *CALLING SEQUENCE: LTI,H,IMAGET *PARAMETERS: H (REQ) (I/O) (1) (R) IUE header vector. Flag, h(68), will be set for THDA
LWPCORFLUX LWPCORFLUX October 1990 Spectral analysis and reduction *CATEGORY: To correct for changes in sensitivity of the LWP, low dispersion spectral data as a function of time. *CALLING SEQUENCE:
LWPFIX LWPFIX Data correction,reprocessing, and calibration To convert old LWP absolute calibration data to the new LWP absolute calibration scale. *CALLING SEQUENCE: LWPFIX,H,WAVE,FLUX,FCORR
LYMANA LYMANA (General IDL Library 01) 15 JUNE 1981 Correction *CATEGORY: *PURPOSE: To correct a spectral segment for interstellar extinction by HI Lyman alpha.
MACPLAT MACPLAT system dependancies - MAC *CATEGORY: Set system dependant items such as system commands that will be spawned, internal data formats, etc. MAC types - { MacOS PowerMac 3.6.1b }
MAKEKEY 11 Oct 94 PJL added code for awk.cmd eq 'NA' 18 Oct 94 PJL added code for cat command equals 'NA' 21 Oct 94 PJL IUER_EXE ---> !iuer.exe
MAKEMELO MAKEMELO (RDAF General Production Library) December 3, l980 Extraction Format Conversion *CATEGORY: *PURPOSE: Creates a new MELO .DAT and .LAB file from an ELBL or LBLS file
MERGEALL MERGEALL (formerly IUEMERGE_MERGE) Spectral Data Reduction *CATEGORY: Merges two wave-flux-flag groups by combining wave1 with wave2, flux1 with flux2, and flag1 with flag2, and sorting them into ascending wavelength order.
MERGEAV MERGEAV (formerly IUEMERGE_AVERGE) Spectral Data Reduction *CATEGORY: Combines two wave-flux-flag (epsilon or nuflags) groups. *CALLING SEQUENCE: MERGEAV,WAVE1,FLUX1,FLAG1,WAVE2,FLUX2,FLAG2,SPNT,WAVE3,FLUX3, $
MERGESP MERGESP (formerly IUEMERGE_SPLICE) Spectral Data Reduction *CATEGORY: Creates a new wave vector composed of those wavelengths of wave1 le to wavel and those of wave2 gt wavel. creates a new flux vector by splicing flux1 and flux2 at the same indices at which wave1 and wave2
MFIT MFIT (General IDL Library 01) Curve fitting *CATEGORY: Procedure to evaluate Y for a set of function parameters A. Y is assumed to be a gaussian on top of a polynomial baseline *CALLING SEQUENCE:
MGEX Spectral Fitting *CATEGORY: To fit cross-cuts of low dispersion spectra with Gaussian functions. This program is intended for images with multiple spectra. *CALLING SEQUENCE: MGEX,IMAGET,WMIN,WMAX,DELS1,DELS2,left,right,center,$
MICRO MICRO JANUARY 28, 1987 *CATEGORY: *PURPOSE: To determine which lines of an IUESIPS image were affected by microphonic noise using information stored in the iue image header *CALLING SEQUENCE:
MISDAT MISDAT 28 January, 1987 Spectral Display *CATEGORY: To display missing, questionable quality, and microphonics contaminated IUE image data from information encoded in the IUESIPS image header label (IUE Vicar label).
MISDAT_ANNOT MISDAT_ANNOT 1-11-90 Spectral Display *CATEGORY: To annotate plot produced by MISDAT for both TEK and SUN type terminals. *CALLING SEQUENCE: MISDAT_ANNOT,IMAGET,NBD,NMS,LMS,SMS,LBD,SBD,L0,L1
MISDAT_ORDCHK MISDAT_ORDCHK *CATEGORY: IUESIPS Procedure to check for valid order type. *CALLING SEQUENCE: MISDAT_ORDCHK,IMAGET,NC,NAME,DATTYPE,DISP,NORD,ORD
MISDAT_QUAL MISDAT_QUAL Menu Procedure Data Extraction *CATEGORY: IUESIPS Extracts IUE Vicar label information describing bad and/or missing
MODLBL MODLBL 10-28-85 File Format Conversion *CATEGORY: To convert new extended line-by-line spatially resolved files (ELBL) to old format line-by-line files (LBLS) or vice versa. *CALLING SEQUENCE:
MULDIRFF MULDIRFF *CATEGORY: Multipe directory findfiles. *CALLING SEQUENCE: MULDIRFF,LISTIN,LISTOUT,count,names,srch_string=srch_string, $ dlimit=dlimit,flimit=flimit
MULTERP MULTERP 26 NOVEMBER 1985 Correction *CATEGORY: *PURPOSE: To interpolate a series of .SAV formatted files onto a common wavelength scale.
MXCON *CATEGORY: Reads IUE fits mxlo files and converts the flux vector to a primary array fits file compatible with IRAF. *CALLING SEQUENCE: MXCON,FILENAME,row=i,mode=n,/label *PARAMETERS:
NET *CATEGORY: calculate net spectra *CALLING SEQUENCE: NET,UNIT,M,H,W,F,E,CUT *PARAMETERS: UNIT (REQ) (I)
NEWCALIB NEWCALIB December 21, 1993 Spectral Calibration *CATEGORY: *PURPOSE: To apply the NEWSIPS absolute calibration, sensitivity degradation correction, THDA sensitivity correction, and exposure gain
NOREAD NOREAD (General IDL Library 01) OCTOBER 27, 1986 File protection, utility *CATEGORY: *PURPOSE: To deny READ, WRITE, and EXECUTE privileges to GROUP and OTHER members for the specified disk file.
NORM NORM (General IDL Library 01) DECEMBER 27, 1984 Fitting Correction *CATEGORY: *PURPOSE: Continuum normalization using either straight line segment
NOTICE *CATEGORY: To display an alert or error message to the user. *CALLING SEQUENCE: NOTICE,DISPLAY_TEXT,base,severity=severity *PARAMETERS: DISPLAY_TEXT (REQ) (I) (1) (S)
NOTICE_EV NOTICE_EV *CATEGORY: Event handler for notice.pro. *CALLING SEQUENCE: NOTICE_EV,EVENT *PARAMETERS:
NSPLOT *CATEGORY: Plots flux, sigma, and nu flags versus wavelength. *CALLING SEQUENCE: NSPLOT,HEADER,WAVE,FLUX,flags,sigma,title=title,/bars,/dots,/mark,$ xtitle=xtitle,ytitle=ytitle,/iuesips *PARAMETERS:
NUFLAGS *CATEGORY: Select NEWSIPS nu flags. *CALLING SEQUENCE: NUFLAGS,SETFLAGS,command_line *PARAMETERS: SETFLAGS (REQ) (O) (0) (I)
NUMORNOT *CATEGORY: Determine if a string consists of only numbers (0-9) or not. *CALLING SEQUENCE: NUMORNOT,INSTR,ANSWER,fopt *PARAMETERS: INSTR (REQ) (I) (string)
ORBEL ORBEL MARCH 1, 1981 Data Manipulation *CATEGORY: To extract orbital elements from line 83 of IUE image header *CALLING SEQUENCE: ORBEL,IMAGET,ORR,ord
OUT_IUELABEL OUT_IUELABEL Menu Procedure *CATEGORY: Print label information to graphics device *CALLING SEQUENCE: OUT_IUELABEL,H
PARCHECK PARCHECK (GENERAL IDL LIBRARY 01) 30-MAR-1987 Error checking *CATEGORY: To check that a procedure has been called with the minimum of allowed number of parameters. *CALLING SEQUENCE:
PARSHIFT PARSHIFT 23 MAY 1987 *CATEGORY: *PURPOSE: To properly assign parameters specified in a procedure call statement containing unspecified optional parameters.
PATCH PATCH 15 MAY, 1981 Correction *CATEGORY: IUESIPS NEWSIPS To remove blemishes from the input flux array where a "blemish" is defined as any point whose corresponding value in the FLAGS array is:
PCHECK PCHECK *CATEGORY: This procedure is used to check the parameters of a procedure for correct type and dimensions *CALLING SEQUENCE: PCHECK,VARIABLE,POSITION,DIMENSION,TYPE
PFIT pfit To fit power laws to data. *CALLING SEQUENCE: pfit,x,a,p *PARAMETERS: x (req) (i) (1) (bilfd)
PISCL Data Conversion *CATEGORY: To convert the Fimage values contained in an IUE PI file to FN's and (optionally) epsilons. *CALLING SEQUENCE: PISCL,FIMAGE,FN,eimage
PLANCK PLANCK (General IDL Library 01) 01-FEB-83 Model Comparison *CATEGORY: *PURPOSE: To calculate the Planck function in units ERGS/CM2/S/A *CALLING SEQUENCE:
PLATFORM PLATFORM system dependancies *CATEGORY: Set system dependant items such as system commands that will be spawned, internal data formats, etc. *CALLING SEQUENCE:
PLOTCLOSE PLOTCLOSE Routine to close plot file opened by plotopen and reset !d.name. *CALLING SEQUENCE: PLOTCLOSE,DNAME *PARAMETERS: DNAME (I) (REQ)
PLOTOPEN Procedure to open plot journal file *CALLING SEQUENCE: PLOTOPEN,DNAME,name *PARAMETERS: DNAME (O) (REQ) device name. Saves the current plot type to reset it
PLOTPRINT PLOTPRINT Sends a plot file created using PLOTOPEN, to the default laser printer and closes plot file. *CALLING SEQUENCE: PLOTPRINT,DNAME,name *PARAMETERS:
PLTPARM PLTPARM (General IDL Library 01) 25 MAY 1991 utility *CATEGORY: *PURPOSE: To save and to restore the system variables used for IDL graphics and image display commands
POINT POINT (General IDL Library 01) JANUARY 14, 1981 Spectral lines, measurement *CATEGORY: *PURPOSE: To interactively measure the wavelength and flux at (a) point(s) defined by the intersection of the graphics cursor cross-hairs.
PRCMPGD PRCMPGD (formerly PRECOMP_GETDAT) Menu Procedure *CATEGORY: Procedure to determine camera, dispersion, image and version number from input data file, check for valid file name, & check exposure time and correction flags.
PRCMPSU PRCMPSU (formerly PRECOMP_SETUPS) Menu Procedure *CATEGORY: Procedure to set wavelength intervals for BCOMP. *CALLING SEQUENCE: PRCMPSU,I,CAM,WA11,WA21,del1
PRECOMP PRECOMP 21 Nov, 1985 Resampling *CATEGORY: To resample IUE high dispersion spectra onto a uniformly spaced wavelength grid. Both wavelength interval and bin size are variable. Data is averaged in each wavelength bin. After prompting
PREGEX PREGEX To allow users to run multiple GEX1/GEX2/GEXCAL jobs in batch mode. *CALLING SEQUENCE: PREGEX,FILE,wmin,wmax,bin1,bin2,center,aperture=aperture,/nocal, $ outdir=outdir,login=login,/prompt *PARAMETERS:
PRINTDC PRINTDC *CATEGORY: IUESIPS NEWSIPS To print the Dispersion Constants in the IUESIPS label or the HISTORY portion of the NEWSIPS fits header. *CALLING SEQUENCE:
PRINTLAB PRINTLAB *CATEGORY: IUESIPS NEWSIPS To display the IUE vicar label for IUESIPS data. To display the IUE vicar or fits labels for NEWSIPS data. *CALLING SEQUENCE:
PRINTTEMP PRINTTEMP *CATEGORY: IUESIPS NEWSIPS To print the temperature (THDA) from the IUE label as determined by IUESIPS, or from the fits header as determined by NEWSIPS. (Note: for IUESIPS, this is the THDA printed in the image processing history
PRINT_IUELABEL PRINT_IUELABEL Menu Procedure *CATEGORY: Print label information. *CALLING SEQUENCE: PRINT_IUELABEL,H
PRORD Reads NEWSIPS prototype melo and silo FITS files, and outputs appropriate array or vectors.
PRTBINS PRTBINS (General IDL Library 01) I/O *CATEGORY: Procedure used to generate a printer text file of the results from BINS.PRO *CALLING SEQUENCE:
PRTOWN PRTOWN *CATEGORY: database *PURPOSE: To access or create a user created print format for use with the IDL procedure IDBPRINT.
PSEUDO3D pseudo3d *CALLING SEQUENCE: PSEUDO3D,WAVE,FLUX,nu,bit=bit,yrange=yrange,title=title,line1=line1 *CATEGORY: both (but has keyword for newsips quality flags) To make a "pseudo-surface" plot of a two dimensional array of fluxes.
PSTRA PSTRA 9/15/92 Data Conversion *CATEGORY: Writes an IDL string array to a disk file for printing or storage. *CALLING SEQUENCE:
QMS *CATEGORY: Modifies !iueprint IDL system variable to be compatible with a QMS printer on VMS or Unix with tek or non-tek screen: *CALLING SEQUENCE: *PARAMETERS: DUM (OPT) (I) () ()
QUADTERP QUADTERP (GENERAL IDL LIBRARY 01) MARCH 15, 1981 Interpolation *CATEGORY: *PURPOSE: To perform a quadratic interpolation in an x-y table. *CALLING SEQUENCE:
RBCORR RBCORR 6-10-92 IUE Absolute Calibration Correction *CATEGORY: To apply Ralph Bohlins low dispersion absolute calibration correction to IUESIPS-calibrated IUE data sets. *CALLING SEQUENCE:
RBS Spectral analysis and reduction *CATEGORY: To correct for time change of IUESIPS lo-disp sensitivity. 86-JUN-19 RCB *CALLING SEQUENCE: RBS,NPTS,ICAM,IAPER,YR,WL,ABSPEC
RBSENSCOR RBSENSCOR April 1989 Ruth E. Bradley Spectral analysis and reduction *CATEGORY: To correct for the change in sensitivity of the LWR and SWP IUE cameras as a function of time. *CALLING SEQUENCE:
RDAFTOGO rdaftogo *CATEGORY: IUESIPS To convert RDAF format disk files to GO format disk files. *CALLING SEQUENCE: RDAFTOGO,FILE,dir=dir
RDIM To read IUE image files and store original data array and scaled byte version of data array as IDL parameters. (Used by IUEDISPLAY for displaying IUE data on an IVAS or X window device.) *CALLING SEQUENCE: RDIM,FILEN,IMAGE,bimage,wave,type=ftype
RDSTDS rdstds To extract standard star spectra stored in !iuer.stds, apply sensitivity degradation and wavelength corrections, and write corrected wavelengths and fluxes to an ascii file if desired. *CALLING SEQUENCE: RDSTDS,FNAME,h,w,f,q,/patch,/plot,afile=afile,type=type
RDZ RDZ Image display *CATEGORY: *PURPOSE: This procedure allows an interactive examination of 2 dimensional images (eg. IUESIPS raw, pi and lbl images, and NEWSIPS raw, li, and
READFILE READFILE 6-25-87 File Transfer *CATEGORY: *PURPOSE: To read IUE (image) .lab and .dat files into memory. *CALLING SEQUENCE:
READLI *CATEGORY: Read IUE linearized image fits files and return the primary fits keywords, vicar label, history portion of the fits header, image, and NEWSIPS flags. *CALLING SEQUENCE: READLI,FILENAME,MAIN_HEADER,IMAGE,FLAGS
READMX *CATEGORY: Read IUE merged extracted spectrum fits files and return the main FITS header (including vicar label) wavelengths, absolute flux, NEWSIPS flags, and sigmas. Background flux, and net flux may also be optionally returned. *CALLING SEQUENCE:
READRI *CATEGORY: Read IUE raw image fits files and return the primary fits keywords, vicar label, history portion of the fits header, and image. *CALLING SEQUENCE: READRI,FILENAME,MAIN_HEADER,IMAGE *PARAMETERS:
READSI *CATEGORY: Read IUE resampled image fits files and return the primary fits keywords, vicar label, history portion of the fits header, image, wavelengths, and optionally, array of nu flags. *CALLING SEQUENCE: READSI,FILENAME,MAIN_HEADER,WAVE,IMAGE,FLAGS
READ_DATA READ_DATA Menu Procedure *CATEGORY: IUESIPS To read an IUE data file from disk into memory. *CALLING SEQUENCE:
READ_LAB Menu Procedure *CATEGORY: To read and convert the IUE label file into a string array parameter. *CALLING SEQUENCE: READ_LAB,LAB_FILE,LABEL,N_LINES,N_SAMP *PARAMETERS:
RENIUE RENIUE 18-SEP-1987 File Format Conversion *CATEGORY: Modifies IUE disk file names to follow new RDAF naming conventions by changing the camera designation (when necessary) to standard 3-character camera acronym, and (if requested and necessary),
REWIND REWIND File Manipulation *CATEGORY: To rewind a device file. *CALLING SEQUENCE: REWIND,UNIT
RIPGET RIPGET *CATEGORY: *CALLING SEQUENCE: RIPGET,UNIT,M,AIR,VRAD,K,A,W,F,X *PARAMETERS: UNIT (REQ) (I) (0) (I)
RIPPLE RIPPLE (IUE Production Library) March 1981 Calibration *CATEGORY: *PURPOSE: To correct an order of an echelle spectrum for the echelle blaze (ripple) sensitivity variation within the order. This procedure
RV RV (General IDL Library 01) JANUARY 14, 1981 Spectral lines, measurement *CATEGORY: GENERAL IUESIPS NEWSIPS *PURPOSE: To interactively measure the radial velocity of features in a spectrum
SAVASC SAVASC (IUE Production Library) (20 June 1988) File format conversion *CATEGORY: This procedure writes the binary data vectors stored in an IUESAVE (.SAV) formatted file, as well as some information from the header vector of the file, into an ASCII text file (primarily columnar
SAVFITS SAVFITS 8/30/90 File Conversion *CATEGORY: Convert IUE SAV files to FITS files using various FITS formats. *CALLING SEQUENCE: SAVFITS,IMAGET,mode,header,/overwrite
SAVLIST SAVLIST (General IDL Library 01) October 3, 1980 *CATEGORY: To save a variable on disk so that it can be read with GETLIST. *CALLING SEQUENCE: SAVLIST,FILENAM,DATA *PARAMETERS:
SCALING SCALING (General IDL Library 01) March 15, 1981 Unit conversion *CATEGORY: Finds the scaling factors for scaling floating point numbers to integer values. *CALLING SEQUENCE:
SCRENSIZ SCRENSIZ *CATEGORY: *PURPOSE: Determine the X and Y pixel size of the terminal screen. *CALLING SEQUENCE: SCRENSIZ,X,Y
SDC Menu Procedrue *CATEGORY: Procedure to set flag in header vector for applying LWR sensitivity degradation correction based on input from user. *CALLING SEQUENCE: *PARAMETERS:
SEARCH SEARCH *CATEGORY: To search the IUE Merged Observing Log database (IUELOG) and the FES database (IUEFES) using user specified search parameters. *CALLING SEQUENCE: SEARCH,RESET,iuelist,feslist
SENSCOR SENSCOR Spectral Data Reduction *CATEGORY: Procedure for applying sensitivity degradation correction using data published in IUE Newsletter 27, p. 50. For LWR, using the modified values published in the IUE Three Agency Meeting, June 1986,
SHOWTXT SHOWTXT File Display *CATEGORY: To display ASCII text files without spawning to system commands (i.e., to emulate vms type or unix cat commands). *CALLING SEQUENCE:
SKIPF SKIPF File Manipulation *CATEGORY: To skip tape files or records. *CALLING SEQUENCE: SKIPF,UNIT,NFILES,R
SLIT_PLOT SLIT_PLOT (RDAF General Production Library) Jan. l990 *CATEGORY: *PURPOSE: Over plots extraction slits (gross and background) on the currently displayed image flux array. *CALLING SEQUENCE:
SORTR SORTR (General IDL Library 01) 15- Sept- 1983 Reordering data *CATEGORY: Procedure to sort X and Y in ascending or descending order, based on order of input X array. *CALLING SEQUENCE:
SPLINE SPLINE (General IDL Library 01) 14-DECEMBER-1981 Interpolation/smoothing *CATEGORY: *PURPOSE: Preform spline interpolations or integrations. *CALLING SEQUENCE:
SRPLOT SRPLOT *CALLING SEQUENCE: SRPLOT,FILENAME,LINE,SOW,h,x,f,q,/across,/along To extract section of SILO file. Summing can be done along or across the dispersion. Can also extract section of IUESIPS format line-by-line file (hence name Spacially-Resolved-plot).
STDSFILE stdsfile To generate an array of filenames of standard star .dat files that satisfy database criteria given. *CALLING SEQUENCE: STDSFILE,FILE,type,cam,im,ap,obj,hd,exp,srch=srch *PARAMETERS:
STDSTARS STDSTARS *CATEGORY: database Search the IUE Standard Star database. *CALLING SEQUENCE: STDSTARS,RESET,list,fmtfile=fmtfile
STPAR *CATEGORY: Obtain the value(s) for the specified keyword from a fits header. *CALLING SEQUENCE: STPAR,HDR,NAME,RESULT,err,nfields=nfields,valid=valid,typecode=typecode *PARAMETERS:
STRUCRD STRUCRD 6/04/93 Data Conversion *CATEGORY: To read IDL variables from an IDL anonymous structure. *CALLING SEQUENCE: STRUCRD,STRUC,P1,p2,p3,p4,p5,p6,p7,...p15
STRUCWRT STRUCWRT 6/02/93 Data Conversion *CATEGORY: To write IDL variables to an IDL anonymous structure. *CALLING SEQUENCE: STRUCWRT,STRUC,P1,p2,p3,p4,p5,p6,p7,...p15
STST1MNU STST1MNU *CATEGORY: database Main menu for IUE Standard Star menu selection procedure. *CALLING SEQUENCE: STST1MNU,CMD
STST2MNU STST2MNU *CATEGORY: database Enter items for menu selection options 1-6. *CALLING SEQUENCE: STST2MNU,CMD,QS
STSTFIND STSTFIND *CATEGORY: database *PURPOSE: Searched the STSTFIND database for all entries which satisfy the search parameters.
STSTMENU STSTMENU *CATEGORY: database Menu routine for selecting search characteristics for the IUE Standard Star database. *CALLING SEQUENCE:
STSTPRT STSTPRT *CATEGORY: database *PURPOSE: To provide printed information on the entries in the IUE Standard Star table specified in the list specified.
STSTVIEW STSTVIEW *CATEGORY: database Procedure to list the search criteria. *CALLING SEQUENCE: STSTVIEW,PFLAG,QS
SWAP_BYTES SWAP_BYTES (General IDL Library 01) 25-APR-80 Conversion *CATEGORY: To perform the byte reordering required for conversion of integer, longword, floating point, or double precision variables between various machine representations.
SWPFIX SWPFIX FEB. 3,1981 Data Correction *CATEGORY: To correct camera 3 ESSR (IUESIPS) images which were generated with the bad ITF file. *CALLING SEQUENCE:
TABINV TABINV JUNE 15, 1981 *CATEGORY: *PURPOSE: To find the effective index of a function value in the domain of a vector array representing the function. *CALLING SEQUENCE:
TAPESCAN TAPESCAN (RDAF General Production Library) 30-JUNE-1987 *CATEGORY: To scan an IUE go-format tape and list file number, IUE camera and image number, file type, and (OPTIONALLY), up to 5 lines of the IUE header label, on designated output device. *CALLING SEQUENCE:
TAPE_LIST TAPE_LIST File Manipulation *CATEGORY: To list the available tape drives. *CALLING SEQUENCE: TAPE_LIST,DUM
TAR_OUT TAR_OUT *CATEGORY: *PURPOSE: To output a tar file to device OUT containing the files listed in TAR_LIS. *CALLING SEQUENCE:
TEMPCOR TEMPCOR 28 MARCH, 1986 Spectral Data Reduction *CATEGORY: To correct IUE flux values for the variation in camera sensitivity as a function of the camera head amplifier temperature (THDA). Based on work by G. Sonneborn and presented at the 3-Agency Coordination
TGAUSS tgauss *CATEGORY: To fit Gaussians and a linear baseline to data points, or just to select peaks and background regions. *CALLING SEQUENCE: TGAUSS,X,Y,PEAK,XL,XR,a,yfit,sig,comment=comment, $
TINIT TINIT (General IDL Library 01) December 3, 1980 Tape handling *CATEGORY: *PURPOSE: To position a tape for writing a new file. *CALLING SEQUENCE:
TITLES *CATEGORY: To create the !x.title and !y.title frequently used for IUE plots of Wavelength vs Absolute Flux (in appropriate units). The y-axis label will be parallel to the y-axis. *CALLING SEQUENCE: TITLES,exponent
TRANS_BYTES TRANS_BYTES To translate the byte representation of IDL variables to a format compatible with the host operating system as defined by the IDL system variable !version.arch. TRANS_BYTES currently supports SPARC (Sun-4s and SPARCStations), MIPSEL (DECstation 3100 and IBM 386 class PCs), and VAX (VAXstation and MicroVAX).
TRIM TRIM JULY 13,1981 Spectral Data Reduction *CATEGORY: Use the values of the wave vector to eliminate all points not within the specified range (LOW to HIGH) of the first vector from the other supplied vectors.
TRIMPTS TRIMPTS (General IDL Library 01) 02 December 1985 Data editing *CATEGORY: To "trim" input XVECT and YVECT vectors so that points are only retained if they fall within the plot boundary
UIXPLAT UIXPLAT system dependancies - Unix and Ultrix types *CATEGORY: Set system dependant items such as system commands that will be spawned, internal data formats, etc. Unix and Ultrix types - such as { sparc sunos 3.5.1} and
UNRED UNRED 3 February, 1983 Spectral Data Reduction *CATEGORY: Procedure to correct for interstellar extinction using various extinction curves. *CALLING SEQUENCE:
UNRED_CCM UNRED_CCM *CATEGORY: Deredden an (ultraviolet) flux vector according to the parameterization of Cardelli, Clayton, and Mathis (Ap. J. Vol. 345, p. 245, 1989). Parameterization is valid from 0.3 microns to 10 microns. *CALLING SEQUENCE:
USRREQ USRREQ *CATEGORY: NEWSIPS To submit a NEWSIPS processing request. *CALLING SEQUENCE: USRREQ,DUMMY,name=name,email=email,phone=phone,affl=affl, $
VACOR VACOR (IUE Production Library) (04 April 1990) Nested_procedures Spectral_reduction_analysis Standalone_software *CATEGORY: Procedure to restore wavelength monotonicity to wavelength vectors
VECFITS VECFITS 8/30/90 File Conversion *CATEGORY: IUESIPS NEWSIPS Convert IDL vectors to a non-homogeneous FITS primary array file. The first input parameter is treated as the
VEC_SPLICE VEC_SPLICE Spectral Data Reduction *CATEGORY: Creates a new vector PAR3 composed of the first N points from PAR1 and the last M points from PAR2. *CALLING SEQUENCE:
VELSUN VELSUN *CATEGORY: This program will calculate the vector velocity of the Earth around the sun for the given Julian date. *CALLING SEQUENCE: VELSUN,DATE,VS
VICAR File Transfer *CATEGORY: Procedure to convert an IUESIPS GO-format vicar label from device unit to an RDAF-format disk file with name imaget.lab. *CALLING SEQUENCE: VICAR,INPUTFILE,IMAGET,NCAM,NIMAGE,BLINE,LUNI,ITF
VMSPLAT VMSPLAT system dependancies - VMS *CATEGORY: Set system dependant items such as system commands that will be spawned, internal data formats, etc. VMS types - { vax vms 3.5.1}, { alpha vms 3.5.1}
WDUMP *CATEGORY: Dump the contents of the current plotting window to a PostScript file. If not color, the file will be sent to the printer. *CALLING SEQUENCE: WDUMP,DUMMY,print=print,color=color,maxsize=maxsize *PARAMETERS:
WEIGHT WEIGHT 6-JAN-83 *CATEGORY: IUESIPS NEWSIPS Convert data quality flags ("epsilon" or "nu") or NEWSIPS sigmas into weight values. *CALLING SEQUENCE:
WEOF File Manipulation *CATEGORY: To write a tape end-of-file mark. *CALLING SEQUENCE: WEOF,UNIT *PARAMETERS:
WFIT WFIT (General IDL Library 01) JUNE, 1984 Curve Fitting *CATEGORY: *PURPOSE: To fit a nonlinear function to weighted data points using linearization of the fitting function (i.e. an IDL version of
WITHIN within to determine whether the elements of a test array lie within the range of another array. *CALLING SEQUENCE: WITHIN,LIMARRAY,TESTARRAY,RESULT *PARAMETERS:
WPOLYFIT WPOLYFIT (General IDL Library 01) 7-25-84 Curve fitting *CATEGORY: To fit a weighted polynomial to data points using the method of least-squares. *CALLING SEQUENCE:
WRITEMX *CATEGORY: To write a file similar to the MXLO file. The main fits header, wavelength information, and flux are required. The nu flags, sigmas, background flux, and net flux are optional. *CALLING SEQUENCE: WRITEMX,MAIN_HEADER,WAVE,ABS_FLUX,flags,sigma,bkgrd,net,filename= $
WRITESI File output *CATEGORY: To write a file similar to the NEWSIPS SILO file. The main fits header, wavelength information, image data and nu flags are saved. *CALLING SEQUENCE: WRITESI,MAIN_HEADER,WAVE,IMAGE,FLAGS,filename=filename,scale=scale
WVAC *CATEGORY: To convert from air to vacuum wavelengths *CALLING SEQUENCE: WVAC,W *PARAMETERS: W (REQ) (I/O) (1) (FD)
W_HELP W_HELP *CATEGORY: *PURPOSE: To create a text window with scroll bars for the user to read a help document pertaining to a particular procedure or family of procedures.
W_LIST W_LIST Widget menu *CATEGORY: *PURPOSE: Display a list of filenames for the user to select from. *CALLING SEQUENCE:
W_MESAGE W_MESAGE *CATEGORY: *PURPOSE: Creates a widget application which contains a message for the user to read. *CALLING SEQUENCE:
W_MISDAT W_MISDAT Widget menu *CATEGORY: *PURPOSE: Display an interactive widget routine for examining IUE images which have missing or bad quality data. The user can display
W_OK *CATEGORY: *PURPOSE: Create a widget application with a text window that contains a message with an OK button. *CALLING SEQUENCE: W_OK,TEXT,title=title,severity=severity
W_SEARCH W_SEARCH Widget menu *CATEGORY: *PURPOSE: Display an interactive widget menu for searching the IUE Merged Log. The user can define the search parameters on the menu and
W_STATUS W_STATUS *CATEGORY: *PURPOSE: To create a text window displaying a status message for the user *CALLING SEQUENCE: PRO W_STATUS,SWITCH,MESSAGE,STATUSBASE
W_YESNO W_YESNO *CATEGORY: *PURPOSE: Create a widget application with a text window that contains a yes/no question for the user to answer and a set of buttons; YES, NO and optionally EXIT for no answer.
XYREADS XYREADS August, 29, 1989 Text i/o for graphics window *CATEGORY: *PURPOSE: To prompt for and read a string input by the user at a specific location in the graphics window.
YDTOYMD YDTOYMD Input/output *CATEGORY: *PURPOSE: Convert and epoch of time in format YYDDD to an epoch of *CALLING SEQUENCE:
YESNO YESNO (General IDL Library 01) FEBRUARY 23, 1981 *CATEGORY: *PURPOSE: To convert an answer to a yes/no question into an integer ( 1 OR 0). *CALLING SEQUENCE: YESNO,IN
YFIT YFIT (General IDL Library 01) Curve fitting *CATEGORY: Procedure to evaluate Y for a set of function parameters A. Y is assumed to be a gaussian on top of a polynomial baseline *CALLING SEQUENCE: